Our Facilities

Vanport is located in Portland, OR at 2711 NE Columbia Blvd. We are conveniently close to and serve the greater Portland, Seattle, and Coastal Markets. Our shop is located in general proximity to a robust supply chain including rental equipment, metal process, and materials. Our nearby vendors and subcontractors help support our clients, allowing fast response to planned and unplanned work.

Our facility is comprised of an 11,000 sq. ft. fabrication area, and a 3,000 sq. ft. machine shop. Our ceiling is generously high allowing us to utilize overhead cranes for most material handling needs. If not our (3) forklifts of varying sizes help to move materials through our shop and onto trucks for delivery to our customers.

We are fully set up for fabrication of most structural steel needs. Within our shop we perform structural steel fabrications, stainless steel fabrications, aluminum fabrications, piping assemblies, custom machined parts, equipment overhauls (valves/pumps/cranes/winches/etc).

We Are Problem Solvers

 

Desire is the foundation of success. We don’t just want to succeed, we need to succeed. The work we do often requires innovative problem solving in time critical situations. Our collective experience and ingenuity allows us to provide novel and cost-effective solutions. We are problem solvers, and we are confident that no matter your problem, we can deliver solutions you can depend on.

Facilities

IMG_2750
IMG_2714

Fabrication Equipment

• ShopSabre High-Definition CNC Plasma (60″ x 120″ Effective Cutting Area)
• Hypertherm XPR 170 Plasma Power Unit
• Hypertherm Powermax 125 Handheld Plasma Cutter
• Miller XMT-350 Field Pro 4-Bank Weldings – Quantity 3
• Lincoln DC600 Welding Machines – Quantity 2
• Miller Syncrowave 350 LX Tig Welding Machine
• Miller Dynasty 300 Multi-Process Tig Runner Welding Machine
• Lincoln LN25 Pro & LN8 Welding Wire Feeders
• Lincoln 260 Power Mig Welding Machine
• Pearson 120×0.5 Hydraulic Plate Shear
• HEM Vertical Bandsaw
• Scotchman 65-Ton Iron Worker
• Pope Machine  72×0.5 Capacity Plate Rolls
• Lagun 10×50 Vertical Milling Machine
• Polamco 13×60 Lathe
• Five 1-Ton Jib Cranes
• One 2-Ton Overhead Bridge Crane
• Three Forklifts

Machine Shop Equipment

• 9×49 Bridgeport Milling Machine w/ NEWALL Digital Readout
• 13×40 Harrison Gap Bed Lathe w/ NEWALL Digital Readout
• 15×50 Harrison Gap Bed Lathe w/ NEWALL Digital Readout
• 18×60 Harrison Gap Bed Lathe w/ 4-Jaw Chuck & NEWALL Digital Readout
• Two GORBEL 1-Ton Overhead Bridge Cranes
• Mitutoyo Outside & Inside Micrometers 0″ – 12″
• Mitutoyo Dial & Test Indicators (0.001″ – 0.0001″)
• ALORIS Tool Posts w/ Wide Variety of Indexable Tool Holders
• Wide Variety of End Mills & Face Mills
• Miller Dynasty 210 AC/DC Tig Welding Machine
• Hydrotest Pumps (0-5000 psi)
IMG_2770
IMG_2713
IMG_2755
IMG_2494

Facilities

vanport-fabrication-and-pipe-shop-1855x1237

Fabrication & Pipe Shop

• Plate brake 100-ton x 48”
• Sheet metal brake 10’ x 11-gauge
• Forklifts
• TIG Welding Machine (Miller)
• Water Cooled
• Wire Feeders (Miller & Lincoln)
• Carbon Steel, Stainless Steel, Aluminum
• Multi-Process Welding Machines (Miller & Lincoln)
• GMAW, FCAW, GTAW, SMAW
• 11,000 square foot undercover shop
• 2 ton overhead crane
• (6) 1-ton jib boom hoists
• CNC plasma/torch 5’x 10’ table for cutting plate up to 4”
• Shearing 10’ x ½” plate capacity
• Rolling 6’ x ½” capacity
• 65-ton iron worker
• DoAll 2013-V vertical band saw
• Pipe bending
• Pipe positioners
vanport-machine-shop-2091x1394

Machine Shop

• Fosdick 6’ x 19” radial arm drill
• Polamaco lathe 13”x 60” swing
• Lagun vertical milling machine 10”x 50” work table
• DoAll Lathe 13”x 40” swing
• SuperMax vertical milling machine 9”x 42” work table